Home > Windows 7 > Solved: File Sharing Issue On Wireless Network

Solved: File Sharing Issue On Wireless Network


Reply Just want to say THANK YOU VERY MUCH for your write up! Those devices can now all work together and can all access internet without needing to separately register. i want to share file over second LAN card. #14 | Written by Roger about 2 years ago. hope to help anyone else that may be looking for help. http://visu3d.com/windows-7/solved-file-sharing-wireless-home-network.html

The improvements in computation and communication capabilities have enabled the creation of demanding applications in critical domains such as the environment, health, aerospace, and other areas of science and technology. Maybe there are other ports you want to open too, or audit the logs to see what is being blocked. #13 | Written by pritej about 2 years ago. No trackbacks yet. Depending upon the vendor and model, however, you might not even have the feature. http://www.practicallynetworked.com/sharing/network_sharing_troubleshooting_tips.htm

File Sharing Not Working Windows 10

However, my desktop, connected straight to the netgear hub in another room, is still on a 204.XXX IP. One icon is labeled Public (f) on dencomputer, the other is f on dencomputer. My IPs are now 204.XXX or 216.XXX and seem to change all the time when I connect. Then see if it fixed your problem.

With the recent emergence of multi core architectures, parallel computing is now set to achieve “mainstream” status. SHOW ME NOW CNET © CBS Interactive Inc.  /  All Rights Reserved. One is in the Den and the other is in the Home Theater. File Sharing Issues In this case the USB drive was not installed.

Do these icons represent a shortcut to the folder or do they represent the actual contents of the folder?Any chance that this similar labeling is causing the problem?Thanks.Larry Flag Permalink This Network Sharing Problem In Windows 7 Best available routers: The Cisco Valet M10 ($100), part of Cisco's recently introduced Valet line, comes with a USB key that has the configuration software on it. Once reported, our moderators will be notified and the post will be reviewed. It's usually in the Advanced Wireless section, or something similar. #12 Reinstall Adapters and Restore Defaults on Router If you've exhausted all the other troubleshooting tasks, you might try reinstalling before

In Vista, click the Change Settings link to get to the actual Windows Firewall settings. Windows 7 Network Sharing Password Problem What follows are six router problems that, quite frankly, I find the most annoying. you should be prompted to sign-on and password just as you would like if you were in front of it, but now your signing on via your network. Simply unplug the power for several seconds and the plug it back in.

  • If Windows is set to use Simple File Sharing, you have only one option.
  • The message says:''Dencomputer is not accessable.
  • On each computer, you can find the ip address assigned by your router by going to Run on the Start Menu and typing in cmd.
  • Here are some steps you can take to make sure your wired or wireless home router and by extension, your network is as secure as possible.
  • Weird.Thanks for your help.Larry Flag Permalink This was helpful (0) Collapse - I'm making progress, but I still have a problem by lfchanin / July 25, 2005 4:06 AM PDT In
  • Thank you for helping us maintain CNET's great community.
  • Almost all routers have Web-based configuration screens, and as long as you remember the device's IP address, default username and password (which you should have changed when you set it up),

Network Sharing Problem In Windows 7

Plus you should double-click the option and make sure all the sub-options are checked. Disruptive posting: Flaming or offending other usersIllegal activities: Promote cracked software, or other illegal contentOffensive: Sexually explicit or offensive languageSpam: Advertisements or commercial links Submit report Cancel report Track this discussion File Sharing Not Working Windows 10 Buffalo's and Netgear's setup instructions go the extra mile by explicitly detailing the order in which you need to you plug everything in before you run the CD. (Cable modems in Windows 7 File Sharing Not Working So the principle to apply would be to ensure that whatever IP address is to connect to us to see our shared files/folders should be on the list of IPs in

On the Den computer it can access the files on the Home Theater computer, and successfully transfers, adds, edits or deletes files.My problem is that on the Home Theater computer it this contact form Right click on the file and select properties to make sure that Read-only is not checked.Another method you may try to have the computers find one another is to right click Reply Hi, im kind of struggling to solve this problem,where i have switch with L3 enable and DHCP configured,i've created vlan 10 the problem is user with vlan1 (default) ip 192.168.1.x Once you're in you should be able to see all your network shares via your laptop through the network including all printers. Not Able To Access Shared Folder In Windows 7

Product Reviews • Routers • Hubs/Switches • Wireless Gateway • Wireless AP • Wireless NIC • Network Storage • Print Servers • Bluetooth Adapters Troubleshooting& Tutorials • Networking • Network routers are small computers, and like your PC, they can lock up and have their own issues. Is there something else I could try first? #19 | Written by stathis about 4 years ago. have a peek here However, you can also access shares manually, which may work even if you can't browse to them.

may contain viruses or scripts harmful blah, blah, it is important to be certain that the computor sharing this printer is trustworthy, would you like to contine? Printer Sharing Problem In Windows 7 do this for all net work printers.......... However, if incorrectly set, these settings could prevent sharing when you want it.

Then right-click on the problem adapter and click Disable.

Reply Thanks for sharing. A couple of suggestions: At: and choose the profile that your network is in (Private, Public, Domain). File and Printer Sharing (SMB-In) allowing two subnets If you want to enable sharing over any network use the "Any IP address" option instead of inserting specific subnets. How To Solve Network Sharing Problem In Windows Xp This is called the UNC path and is formatted as: \\computer_name\share_name\optional_file_name #2 Use the Windows Repair and Diagnostics Tools In Windows XP, right-click the network icon in the system tray and

If you want to be more restrictive than "any", check to see the IPs that your machines probably take from DHCP and add them, or add the IP block ( or It found the computer and I then had to enter in a user name/password - which for that computer (in my case) was a user name with no password. What about when you wanted to add a new PC to your wireless network? Check This Out Then make sure the Client for Microsoft Networks and the File and Printer Sharing for Microsoft Networks options are checked. #6 Restart the Network Connection Sometimes restarting, or disabling and re-enabling,

To refresh your computer, restart it like normal. #8 Restart the Router This technique applies more when sharing doesn't work on all the computers. If you believe this post is offensive or violates the CNET Forums' Usage policies, you can report it below (this will not automatically remove the post). So very simple your not going to believe it. You'll probably find the underlying cause or simply get sharing working like you want.

Once I did that I was able to define a network file share by entering in the IP address of the computer - as in \\\ then selecting ‘browse'. When was the last time you were able to get it right on the first try? Difficult configuration The problem: How long does it usually take you to set up your router? Contact the administrator of this server to find out if you have access permisions.

your going to get a permission notice "your about to connect to a printer "printer name" which will automatically install aprint driver on your machine.... This setting can be referred to as Client Isolation, Layer-2 Isolation, or WLAN Partition. Preview post Submit post Cancel post You are reporting the following post: Computer on network can't access shared files or printer This post has been flagged and will be reviewed by This is because of the default firewall rules of Windows 7.

Old hub used to be setup as a router, so then all devices in all rooms, including my own wireless setup with DHCP, were on the same 192.XXX.. However, you should consider the implications of this since anyone will be able to see the sharing and potentially access it (depending on the permissions you set for it). I was able to finally access the network printer!!The troubleshooter also suggested accessing the other computers files by typing \\computer\share\ in the run box. (where computer is the other computer and Please refer to our CNET Forums policies for details.

The setup I will use as an example is pretty simplistic: Assume that you have a router with an ethernet-based LAN which is configured as subnet 192.168.77.xx, and a Wifi-based network Does that work? For more help, check out the PracticallyNetworked Forums. If I set my own wireless router (linksys running tomato) to static and turn DHCP off, then I can share between my desktop (hard wired into the central netgear hub) and

Then login and see if it has this feature and whether its checked. by lfchanin / July 22, 2005 12:54 PM PDT In reply to: Can't Access Computer on Network guest77-Thanks for the help.I tried following your instructions and I was able to update There might be a glitch with Windows or the network connection that's preventing sharing.