Home > Solved Help > Solved: Help Adding Second Hard Drive To Dell Dimension 8200

Solved: Help Adding Second Hard Drive To Dell Dimension 8200

However, to explain where it came from and what to do about it, I have to explain a bit on how the computer works.Most PC's nowadays comes with two IDE channels. So, both show up in the BIOS ( the WD HDD wasnt showing in EZ mode, but I was able to find it in the advanced mode ) but I cant New bigger hard drive. But you can certainly get a new hard drive and put Windows on that. http://visu3d.com/solved-help/solved-help-with-adding-pictures-to-outlook-express-6.html

You didn't mention how old your Dimension desktop is, but that seems to be the most likely cause so far. Why? Full details are here http://library.techguy.org/wiki/TSG_Posting_a_Screenshot etaf, Jan 21, 2012 #2 Frank4d Trusted Advisor Joined: Sep 10, 2006 Messages: 9,126 It should show as Disk1 in Device Manager, but won't show July 12, 2012 mahesh Thanks Dave, The drive is spinning. https://forums.techguy.org/threads/solved-help-adding-second-hard-drive-to-dell-dimension-8200.1037381/

Or at least copy critical data to another source while you can still access the drive. July 12, 2012 Shyam Hi Mahesh, Did you get any solution to your problem? It is neither part of your hard drive, nor part of your operating system. Take it to your local electronics shop and they'll give you a replacement (Radio Shack, Best Buy, etc….).

stored on his local machine which is not being backed up. Good luck. Dell ships all of its desktop pcs with Western Digital hard drives, which - contrary to popular belief - are NOT the best drives out there. Have you looked at the settings in the BIOS to make sure the the drive is set to Auto Detect settings?

Can you help me how install it. I tried to keep the drive in external hard disk case and kept in usb port. Either way, it does sound like your drive it shot. http://www.tomshardware.com/forum/252194-32-install-hard-drive-dell-dimension-e520 October 28, 2011 Jeremy Old cpu died.

please throw some light.. The value for this field should be set to Hard Drive. Thanks March 24, 2013 Dave I have no way of knowing-unless you wrote down the serial number of the original drive. August 22, 2012 melics i have a 160 gb WD sata harddisk..

Was it working prior and quit or has it always been this way? now the hard drive isnt recognized by the bios, will not show up under my computer when set as a slave on a different desktop and will not show up under I also run every kind of disk tests from hirens boot cd and everything seams to be alright, no errors at all. I don't want to be slotting out/in the harddrive every time to get it to work as this is not going to do the connections any good at all.

Any idea of why this is happening? http://visu3d.com/solved-help/solved-help-i-toasted-my-hard-drive.html It's a Seagate Barracuda 7200.7, and the problem is, the BIOS doesn't see it, but when I boot from a system disk, be it Linux or Windows, then they both see Now i can t hear the noise anymore , but still not present.I ve got a windows 7 64 disk repair taking from an hp laptop.when I put it it shows All I got is a piece of cardboard in the shape of a CD saying I could get reinstallation files online, which might be rather useless if I only had one

  • It is not dead?
  • Or until you're ready for whatever your next computer will be.If it's no longer under warranty from the drive maker, you will need to buy yourself a new drive.
  • This post has been flagged and will be reviewed by our staff.
  • The next day I turn on the computer to find that it won't load into windows (the msg you get when they can't find your drive).
  • Yes, the drive should work fine.
  • Advertisement r_kage Thread Starter Joined: Oct 6, 2008 Messages: 26 I'm trying to add a second hard drive to my dell dimension 8200 on a Windows XP system.

When I boot up the computer, it loads Windows from Drive nÂș2 : and both of the HDDs are detected on "my computer" ( both of the HDDs work perfectly ) Press the SPACE bar to see what is listed as your primary drive, if anything. The drive needs to be partitioned and formatted. his comment is here A new computer might be around $500.

Do not buy one that doesn't at least match the one you're replacing. Its usually wrote somewhere on the board in white writing or if you can not still get the board, Download Belarc Advisor from http://www.belarc.com/free_download.html and run this program. You can burn the .ISO file to disk and boot to the DVD.

If I hit F1, my computer almost always starts up as usual.

Do you have any suggestions I could fix this permanently thanks Jon. I would also consider a BIOS update. However, that takes a few seconds to complete. Press ESC to exit. 5.

Was working perfectly in my macbook pro 17″. You'll find discussions about fixing problems with computer hardware, computer software, Windows, viruses, security, as well as networks and the Internet.Real-Time ActivityMy Tracked DiscussionsFAQsPoliciesModerators General discussion 3/10/06 Primary drive not found! If not, that's bad news and could mean an electrical board problem with the drive. http://visu3d.com/solved-help/solved-help-dell-4400-stuck-in-a-coma.html June 14, 2012 Asier Hello, I've got a strange problem with my hard disk.

This can be very helpful if something is wrong with the OS on your hard drive.Now comes your particular problem (or what I am 99% sure is the cause of it). This is especially true if a hard drive was replaced. October 26, 2009 Alex Hi, I think I have a bit of a problem… I have an old Dell Dimension XPS with 2 hard drives. Again, follow the navigation instructions at bottom of the screen.

so what!!!) or something else.I use and like WordPerfect. Sign up now. The IDE Primary Slave should be set to Off, Disabled or None. You can put your HDD before or after the floppy and CD-ROM drives - but just make sure that LAN setting is "dead" last (pun intended).Submitted by: Scott Z.

There I found a Windows drive for the Internet connection. Your data might still be recoverable….I would post this in our forums so others can have a crack at helping you. Conveniently, Maxtor uses this same tool to generate a diagnostic code that can be submitted via their Web site to request a replacement drive if the drive is still under warranty.6.) July 13, 2012 Liz Hi I have a Advent 7201 laptop, which when started I get the Advent logo, 2 options for bios and multi boot then the screen goes blank

Note: SOME utilities may want to install themselves on a floppy disk. This can be tested. There are many NetBIOS versions on the net you can download, you just have to look in the right direction.7) If you don't have a virus scanner I would recommend installing Thanks in advance June 16, 2012 Mark Hi, i am running two hardrives a 74gb WD and a 1.5TB WD both SATA drives, the problem I am having is that sometimes

There was no native (manual) install option listed under Dell's BIOS menu options so I left it at Auto! By the way I can use this drive as external drive and it spins as well. If it recommends replacement, and you're beyond your drive's warranty period, it's time to buy a new hard drive. Mark July 20, 2011 Kitty I have a Dell Vostro 200 that is three years old.

For simplicity, stick with the Master and Slave setup. Thank you for helping us maintain CNET's great community. If you still have issues, try posting in our forums for additional help. It seems like the controllers on the motherboard have failed if the hard drive is working on other computers.