Home > Hard Drive > Solved: Harddrive Just Died Or File Table Messed Up?

Solved: Harddrive Just Died Or File Table Messed Up?


If this fails, you can also choose to refresh or reset your system (how to┬árefresh Windows 8 How To Restore, Refresh, or Reset Your Windows 8 Installation How To Restore, Refresh, Reading the article, there is no instruction that is Ubuntu/Debian specific (apt-get, debpkg, etc) So the exact same method would work on any distro that had the GNOME desktop. So basically I still can’t get to the point where I can do a system restore, the CD seems to have helped a bit, but I still can’t actually boot windows What has saved you? navigate here

You have to start up Vista in the Recovery Environment and then run the bootrec command. Hard Drive Recovery Tip From: Andrzej Bednarz The answer to the hard drive question is more complex than you may think, but the bottom line is that you really need to Sometimes a connector did come out a bit on one side and you put it back properly without noticing. "Put the right spin on things" Next, is the drive spinning when Well, don't panic yet. https://forums.techguy.org/threads/solved-harddrive-just-died-or-file-table-messed-up.585139/

Computer Won't Boot From Hard Drive

and just enjoy what I have. Please advise, thanks. After that I did what you wrote: fixmbr, fixboot, rebuildbcd, but without changes. Listen for unpleasant noises (after head crash).

What can I do? Working with found Data Glossary of terms Pre-Installation Checklist Load previous recovery result Find file by name End user license agreement Installation Data Recovery Resources Recover Deleted Files Partition Recovery Resources I connected an external HDD and copied folders under the C drive into a folder I created for this backup process. Recover Files From Unbootable Hard Drive azhar says: 6 years ago Use the fixboot for xp guys.

Details ntfs_attr_pread_i: ntfs_pread failed: input/output error Failed to read NTFS $Bitmap: Input/output error NTFS is either inconsisten, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. The application does not recognize the new drive when attached to the pc. If so, will the solution provided in this article work? I am running vista on the computer.

Why Partition Is Lost Sometimes, users know clearly that their partition is lost because they just delete it by pressing the wrong button. How To Fix A Hard Drive That Won't Show Up In this case I would also check the power cable and the connections. Thanks ROCKY says: 8 years ago yeap, this article saved me a bunch of time as I have one physical drive with 2 primary partitions, vista/xp on them and somehow Norton I also had someone who gave it a try and returned my harddrive to as new condition, that didn't work either.

External Hard Drive Won't Boot

When I run your program it is detecting my primary drive and the trouble one (displaying correctly as 320gb). The solution was to fire up diskpart from the same command prompt and mark the volume that had my OS as active: diskpart list volume (to identify the disk and partition Computer Won't Boot From Hard Drive Well, I'm kind of new to this, but I'll throw my hat in the ring. Hard Disk Not Booting Windows 7 This gets you out of the malfunctioning environment and into a controlled space, YOUR workbench.

How to recover data after partition? http://visu3d.com/hard-drive/solved-harddrive-from-old-machine.html But if only logical sector/track is detected, the hard drive can continue to be used as long as users finish shielding the bad sectors. I copied a few folders without any messages intervening. Thus far, I have wrecked my system 3 times with my own stupidity since I got a Windows Vista computer, and every time that Repair Boot choice that appears when you How To Recover Files From An External Hard Drive That Won't Boot

I am thinking of getting rid of my latter debian installation, then formatting (hd0,0) into ntfs or fat32, and finally running rebuildbcd again to see if I can then boot my Bastard machine. http://www.howtogeek.com/forum/topic/help-start-windowsretrieve-data?replies=3 any ideas? his comment is here I turned the disk back and got a new one, just to realise that after the cloning, happened the exact same thing.

Put the cables back on and try again. Hard Drive Won't Power Up But when I check to see how much I really have I get 298gb. Advertisements do not imply our endorsement of that product or service.

TIA Stan says: 7 years ago Here is my success story.

  1. Enjoy!
  2. Sweet!
  3. My computer recently gave me the "system32\config\system file is corrupt or missing", and I have so many files on my computer I didn't want to lose.
  4. The usage of the /f parameter is very important!
  5. How Could Lost Partition Recovery Be Done MiniTool Power Data Recovery is small in size but powerful in function and it is totally clean, no virus & spyware could ever be
  6. No, create an account now.

Now I'm getting the following message: "Windows could not start because the following is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM" When I try to run FIXMBR using Recovery Console I get the followin my 1 TB harddrive which had all my data on was reporting on 33 MB and coming up as RAW in Windows. So how can you repair your damaged MBR? Rebuild The Mbr If the system recognizes the drive but does not boot up your OS, cold boot your system from a bootable virus ERD and do a complete scan of the failed drive.

I also would not trust the error codes. Isn't Windows beautiful? Verify power to Hard Drive (HD), Multi-tester (VDC), or another system plug. weblink My new 2.5 disk had a problem during a ghost and only 110 GO appeared after.

i got as far as the live cd on my own thinking but i couldnt figure out how to mount the drive until i saw this amazing article :) October 11, we never know July 14, 2008 Bob I love ubuntu, but would something like puppy linux not be equally suited to this use? The options are "Cancel" "Skip all" "Skip". Even free partition recovery is achievable if only users turn to helpful tools in time.

Any hints on how to access that information? June 9, 2009 Smithg I have an ACER 5000 laptop running Windows XP. however, i have a little problem. Now I am trying to repair the MBR but I can't find anything that works with linux or finding a program that can boot from the cdrom to repair the window

Even the Hitachi tool fails to set the correct geometry. Sorry, I don't know the fix, keep googling. I used this very successfully on a drive that the FAT became corrupt on and would not ID or boot up on. Can I use Windows XP Upgrade CD to restore Vista?

Followed the steps in this article and it WORKED! If the BIOS can now see the drive but the drive still does not boot, then you may need to reload the OS or at least replace the necessary drivers. fast, silent, liked it.